Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Ceramic smart wear

Wearable Laser Cutting Ceramic Substrate
  • Materials:Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes:Custom according to the drawings
  • Delivery times:2 -25 days(depends on the quantity)
  • Precision:Ra 0.1um tolerance: 0.001mm... etc
  • Features:Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...
  • Customized:Can be custom for special sizes and shapes
    1. Factory price and shipment within 24 hours In stocks
    2. MOQ:1qty
    3. Payment Term: PayPal; T/T; L/C etc.
    4. Shipment: by sea by air by courier by post etc.

Wearable Laser Cutting Ceramic Substrate


 
High rigidity:
Wearable Laser Cutting Ceramic Substrate rockwell hardness is hra80-90, second only to diamond, far exceeding the wear-resisting property of wear-resistant steel and stainless steel.
 
Strong wear resistance:
Wearable Laser Cutting Ceramic Substrates wear resistance is equal to 266 times of manganese steel and 171.5 times of high chromium cast iron.

High quality lighter:
Wearable Laser Cutting Ceramic Substrates density is 3.5g/cm3, which is only half of the steel, which can greatly reduce the equipment load.

Materials:

Property Alumina  Property Zirconia
Bulk density(g/cm3) 3.85-3.93 The density (g/cm3) 6.05
Hardness(HRA≥) 86 Bibulous rate(%) 0
Bending strength(Mpa≥) 300 Thermal expansion coefficient(10-6 /k) 10.5
Maximum service temperature(℃) 1500 Young's modulus of elasticity(Gpa) 210
Linear expansion coefficient(×10-6/℃) 7.15-7.67 Poisson's ratio(/) 0.3
Dielectric constant(εr(20℃,1MHz)) 9.21 Hardness (MPa) 1200
Dielectric loss(tanδ×10-4,1MHz) 2.5 Bending strength (MPa) 950
Volume resistivity(Ω·cm(100℃)) 9.2*1016 The bending strength (MPa) 210
The compressive strength(Mpa≥) 2500 Compressive strength (MPa) 2000
Flexural strength(Mpa≥) 200 Fracture toughness(Mpa.m1/2) 10
Modulus of elasticity(Gpa) 300 Thermal conductivity (W/m.k) 2
Poisson's ratio 0.2 Specific resistivity(Ω.mm2/m) >1015
Thermal conductivity Coefficient(W/m·K(20℃)) 20 Maximum service temperature(℃) 1350
Dc breakdown strength 43.7 Acid and alkali corrosion resistance(/) strength
Tensile seal strength(Mpa) 104.4    


Dimensional accuracy Up to 0.001mm
Smoothness Highest possible mirror
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Visual quality:
1. No cracks,  no dark dots, no contamination and sharp edges;
2. Evenly distributed glaze with very smooth surface

Properties :

1. High Hardness wear resistance
2. High precision
3. Good mechanical strength
4. High temperature and chemical resistance
5. Electric insulation
6. Low thermal expansion
7. Smooth surface finish
8. Thermal Shock Resistance 


Material :  
1. Alumina ceramic
2. Zirconia ceramic
3. Silicone carbide
4. Silicone nitride
Lead-time: 20-30 days for mass production, 7-15 days for samples.
 
Us can be based on customer drawings and requirements to provide non-standard ceramic accessories and provide related solutions.

Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

CONTACT US
在线客服系统