Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Ceramic plane processing
Locationa href='/'>Home > Ceramics process >Ceramic plane processing
 

Ceramic plane processing

   
There are many methods of ceramic plane machining, and almost all of them can process plane, car, mill, plane, mill, pull, line cutting.

Among them in the surface grinding machine application most.Grinding is generally used in finishing.Planing and line cutting are generally used when the batch is very small.Mingrui can process all kinds of non-standard ceramic structural parts and special-purpose ceramic parts according to customers' use environment, drawing requirements and material properties!Main materials include: alumina ceramics, zirconia ceramic structure products.
 


The precision we can achieve in processing:
Dimensional accuracy Up to 0.001mm
finish Highest possible mirror
concentricity Up to 0.003mm
parallelism Up to 0.002mm
The inner hole tolerance The minimum machinability is 0.005mm
Straight flute The narrowest machinable groove width is 0.1x100mm
The thickness of the size Minimum machinability to 0.02mm
The screw thread Minimum machinable internal thread M2, no limit on external thread
cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum processing capacity is 0.07mm


Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

CONTACT US
在线客服系统