Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer
Focus on Alumina / Zirconia ceramic parts R&D and production
+86 -181 2297 4730
Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer
Focus on Alumina / Zirconia ceramic parts R&D and production
+86 -181 2297 4730
Moble: +86 18122974730
Phone: +86 0769-85090316-8038
Email: admin@cerampart.comSkype: admin@cerampart.comWechat: +86 18122974730
| Length (inch) | Thickness (inch) | Width (inch) |
| 0.75 | 0.165 | 0.63 |
| 0.875 | 0.187 | 0.227 |
| 0.975 | 0.2 | 0.312 |
| 1 | 0.39 | 0.25 |
| 1 | 0.177 | 0.75 |
| 1 | 0.5 | 0.75 |
| 1.17 | 0.23 | 0.355 |
| 1.875 | 0.187 | 0.875 |
| 1.875 | 0.387 | 0.875 |
| 1.875 | 0.387 | 0.875 |
| 2.95 | 0.5 | 0.95 |
| 3 | 0.125 | 2 |
| 6 | 0.25 | 4 |
Our laser machining, polishing, and lapping processing services include:
Laser precise cutting, drilling, and scribing of ceramics from stock
Laser marking Ceramic Substrates.
Delivery from in stock Alumina , Zirconia , Silicon Nitride or Aluminum Nitride Substrates
High-precision optical alignment capability
High-resolution measurement capability with +/- 5 micron accuracy
Flex-circuit skiving and programmed pattern cutting
Single-, dual-, and quad-beam laser systems that offer fabrication flexibility and maintain tight tolerances across production runs
Available expert advice from on-staff senior application specialists
Computerized job tracking for efficient and accurate expediting
Design and application and engineering assistance
Ceramic Substrates Material Selection:
Alumina Oxide (Al2O3) – The most widely used ceramic
Zirconia oxide (ZrO2) – Extremely strong and tough
Aluminum Nitride (AlN) – Excellent thermal conductivity
Silicon Nitride (Si3N4) – Excellent fracture toughness at high temperatures and thermal shock resistance
|
|
Al 2O 3 |
ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN |
| Physical properties | ||||||||
| Density (g/cm3) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
|
Customization & Machining Service: As a ceramic plates manufacturer,us offer a wide of the ceramic plunger specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL. Our Custom Capabilities: 1.High Purity Martoxid Powder 2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience 3.35000 ㎡workshop, annual output could reach hundred million pieces. 4.All crafts are inspected strictly based on drawings,checked each month. 5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc. |
|
|||||||||||||||||||||||||||
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
| For more information about ceramics parts,please contact our engineers in time >>> |
  |
Dynamic information Ceramic technology FAQ Ceramice exhibition
Ceramics quality Ceramics technical Ceramice after-sale Customer witness Patent certificate
Ceramic flange Ceramic bushing Ceramic plunger Ceramic pump valve
MB：181 2297 4730 Tel：86 769 85080316
Skype：admin@cerampart.com Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City
Mobile version
