Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer
Focus on Alumina / Zirconia ceramic parts R&D and production
+86 -181 2297 4730
Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer
Focus on Alumina / Zirconia ceramic parts R&D and production
+86 -181 2297 4730
Moble: +86 18122974730
Phone: +86 746 3386888
Email: admin@cerampart.comSkype: +86 18122974730Wechat: +86 18122974730
Ceramic sheet was producted of the technical ceramics with a high strength insulations.
When selecting a ceramic material for its thermal insulation capability, considerations must also be made regarding their thermal conductivity. Ceramco’s fully dense alumina exhibits a thermal conductivity rate almost ten times higher than zirconia. fully dense zirconia formulations offer the lowest thermal conductivity of all materials currently offered by mingrui.
Parts of us oem ceramic sheet/ plate
| Length | Width | Thickness | Compressive Strength | Density | Fracture Toughness | Hardness | Maximum Operating Temperature | Thermal Conductivity |
| 100mm | 100mm | 3mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | +800°C | 1.46W/mK |
| - | 25mm | 2mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | +800°C | 1.46W/mK |
| 50mm | 50mm | 1mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | +800°C | 1.46W/mK |
| 100mm | 100mm | 10mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | +800°C | 1.46W/mK |
| 100mm | 100mm | 6mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | +800°C | 1.46W/mK |
| - | 50mm | 2mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | +800°C | 1.46W/mK |
| 50mm | 50mm | 2mm | 35kg/mm² | 2.52g/cm³ | 1.53MPa | A 48 Rockwell | - | - |
|
Dimension : ·Inside Diameter as small as 0.3 mm ·Inside Diameter tolerance we could make as fine as 0.002mm ·Outside Diameter tolerance as fine as 0.001mm ·We can be custom / OEM For the sheet/ plates/substrates |
Additional Information:
·Discounts on large quantities of Ceramic plates ·In stock items will typically ship in a few working days. ·Unit price and estimated ship dates will be calculated when the length and quantity are specified. |
Company Advantage
OEM factory, High quality, Precision processing, Pipelining assembly, 100% QC process, Plentiful stocks, Fast and Safe shipping.
Voltage and Insulator
High frequency insulating ceramics have small dielectric constant, low dielectric loss, high mechanical strength, high dielectric strength, insulation resistance and thermal conductivity.Dielectric constant up to 10; Electrical resistivity up to 10∧14 Ohm.cm at 20°C ;Dielectric strength up to 20 kV/mm...
| · Flexural strength | · Chemical resistance | · Electrical insulation | · Corrosion resistance | · Dielectric strength |
| · Wear resistance | · Temperature resistance | · Thermal conductivity | · High voltage | · Hardness... |
|
|
Al 2O 3 |
ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN |
| Physical properties | ||||||||
| Density (g/cm3) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
| Precision of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Smoothness | Highest possible mirror |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
|
Visual quality: 1. No cracks, no dark dots, no contamination and sharp edges; 2. Evenly distributed glaze with very smooth surface |
|
Customization & Machining Service
As a professional manufacturer of industrial ceramic components.We can custom the sepcial specifications of ceramic tubes, rod or other ceramic parts.High quality,Factory price, on-time delivery, High composition of ceramics
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-10 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
| For more information about ceramics parts,please contact our engineers in time >>> |
 |
Dynamic information Ceramic technology FAQ Ceramice exhibition
Ceramics quality Ceramics technical Ceramice after-sale Customer witness Patent certificate
Ceramic flange Ceramic bushing Ceramic plunger Ceramic pump valve
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City
ADD：Southeast corner of the intersection of Changliu Road and Wangzhou Road, Qiyang High-tech Industrial Development Zone, Yongzhou City, Hunan Province, 426141,China
Mob：181 2297 4730 Tel：+86 746 3386888
Skype：+86 18122974730 Email：admin@cerampart.com
Mobile version
