Cleaning and Sterilization Of Zirconia Ceramic Filling Pump

Zirconia ceramic filling pump in use for a period of time, in order to ensure cleanliness and hygiene, it is necessary to clean and sterilize the zirconia ceramic filling pump.

Zirconia ceramic filling pump in use for a period of time, in order to ensure cleanliness and hygiene, it is necessary to clean and sterilize the zirconia ceramic filling pump.

Due to the material characteristics of zirconia ceramic filling pump, we need to pay attention to many aspects in sterilization.

The following content will introduce what matters needing attention in the cleaning and sterilization of zirconia ceramic filling pumps.

1. Zirconia ceramic filling pump cleaning and sterilization should not use the chlorine-containing chemical solution to contact with stainless steel to prevent corrosion of stainless steel parts.

2. Zirconia ceramic filling pump cleaning sterilization cleaning shall not pull ceramic metering parts in hot water exceeding 40 ℃. Ceramic plunger and ceramic sleeve should be cleaned separately.

3. The hardness of zirconia ceramic is greater than that of metal, zirconia ceramic contact with metal can make the ceramic surface dirty, can be cleaned with a small amount of concentrated sulfuric acid (hydrochloric acid); if there is yellow dirt on the pump body, soak in 10% oxalic acid for 5-10 minutes, then rinse with injection water.

4. The hardness of zirconia ceramics is higher than that of stainless steel. The contact between zirconia ceramics and stainless steel can make the ceramic surface adhere to stainless steel, which can not be removed, which may cause the filling pump not to run smoothly or not to move and causing damage. It is recommended to use non-metallic materials as storage containers when cleaning and sterilizing.

The above is the introduction of the points for attention in the cleaning and sterilization of zirconia ceramic filling pump analyzed by Mingrui Ceramics. I hope it can help you. If you need to customize the ceramic filling pump, please contact us.