Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730


Ceramic Knowledge
Location:Home > Ceramic Knowledge >
Zirconia ceramic shaft sleeve
Time: 2020-09-10   Writer: mingrui

Zirconia ceramic shaft sleeve

Zirconia ceramic shaft and ceramic sleeve are mainly used for some pump valves with high speed rotation.
Zirconia ceramic shaft sleeve has the advantages of high hardness and high abrasion resistance.
Its service life is more than 10 times the ordinary steel bushing.

Zirconia ceramic bushing features:
Zirconia ceramic shaft has the characteristics of self-lubricity, wear resistance, low noise, convenient assembly, long life, small loss, impact resistance, good toughness and so on.
Especially suitable for corrosive and other harsh environment.
Technical parameters of zirconia ceramic bushing: porosity 0%, perpendicularity;
0.05, straightness;
0.01, finish;
Applications and advantages of 0.2um water pump ceramic shaft and shaft sleeve.
Brushless DC magnetic force drive water pump, using electronic reversing, no carbon brush reversing, using high-performance ceramic shaft and ceramic sleeve, shaft sleeve and magnet integrated to avoid wear, so the life of magnetic pump is greatly enhanced.
The stator and rotor parts of the silicon carbide ceramic magnetic isolation water pump are completely isolated. The stator and circuit board parts are sealed with epoxy resin and are 100% waterproof. The rotor part is made of permanent magnet.
Zirconia ceramic bushing advantages: long life, noise below 35dB, can be used for hot water circulation can be installed underwater and completely waterproof, the pump shaft adopts high-performance ceramics, high precision, good earthquake resistance.

Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin