What characteristic does wear-resisting ceramic coating have
Time: 2019-03-30 Writer: mingrui
What characteristic does wear-resisting ceramic coating have
Viscose layer:
ceramic adhesive, strong shear force, good construction.
Ceramic layer:
according to the curvature radius of the elbow customized radian, each section of the ceramic pipe end to end socket connection.
Steel tube layer:
the bending pipe adopts SUS304 integral hot bending forming.Compared with welded elbow, it has better appearance, unobstructed airflow and pressure resistance.
Wear-resisting ceramic tube
1. Super wear resistance
Its hardness is second only to diamond, and its service life is 20 times that of ordinary carbon steel pipe
2. Never fall off, high reliability
Socket type connection between inner liner, adhesive aging does not fall off, control the difference between high and low at the same time to reduce the risk of leakage;
3. Good integrity
Smooth inner wall, unobstructed airflow, not easy to wear;Low pressure loss and high conveying efficiency
4. Super corrosion resistance
There is no linear gap between the liner, and the viscose filling layer has good acid-base resistance
5. Isolate iron and improve quality
The ceramic liner reduces the abrasion of the pipe and solves the problem of iron impurities in the powder caused by the abrasion of the steel pipe
Product features
Wear resistance: mohs hardness up to H7, 10 times of teflon.
Corrosion resistance: acid and alkali resistance, salt fog resistance, aging resistance, can be used in outdoor or high humidity and high heat conditions.
Convenient construction: single component, brush coating, roller coating and spraying.
Ask: what technical requirement does wear-resisting pottery and porcelain tube have commonly?
A: centrifugal casting of composite ceramic pipe, centrifugal casting of composite ceramic pipe is the use of "self-combustion high temperature synthesis - high speed centrifugal technology" manufacturing of composite pipe, in high temperature and high speed formation of uniform, dense and smooth surface of the ceramic layer and transition layer.
Q: wear-resistant ceramic coating
Answer: all kinds of wear-resisting and high-temperature ceramic coating, cement, used for all kinds of wear and corrosion fan volute, elbow pipe, coal mill export, thick and thin parts separator pipe, chute, hopper, valve.Nine, wear-resisting magnetic separation.
Q: wear - resistant ceramic pipe using isostatic molding what are the characteristics?
Answer ceramic tube is at present the wear-resisting material of first selection in industrial production wear-resisting tube, but its make production craft is more cumbersome, wear-resisting ceramic tube USES mechanism of equal static pressure to make and become, its accuracy is high, can make big pipe diameter, compactness is good, the characteristic such as long service life.
The operation process of isostatic pressure equipment is as follows:
firstly, fill the prepared blank into a mold made of plastic or rubber, place it in a high-pressure container, seal it, and then drive the high-pressure liquid medium, and transfer the pressure to the mold to pressurize the blank.
Then release the pressure to take out the mold, and take out the formed blank from the mold.The liquid medium may be water, oil or glycerin.But should choose the medium with small compressibility to be advisable, if brake oil or anhydrous glycerine.Mold materials should be good oil resistance of rubber or similar plastic.
For more information,please contact us.
CEO : Mr Admin
Dongguan Mingrui Ceramic Technology Co., Ltd.
Mobile : +86 18122974730
Tel : +86 0769-85090316-8038
E-mail : admin@cerampart.com
Website: www.cerampart.com
Skype: admin@cerampart.com
We chat: +86 18122974730
Moble: +86 18122974730
Phone: +86 746 3386888
Email: admin@cerampart.com
Mobile version