Wear - resistant ceramic tube features

Viscose layer: ceramic adhesive, strong shear force, good construction.
Ceramic layer: according to the curvature radius of the elbow customized radian, each section of ceramic pipe end to end socket connection.
Steel tube layer: the bend is formed by the integral hot bending of SUS304.Compared with welded elbow, it has better appearance, unobstructed airflow and pressure resistance.
Wear-resisting ceramic tube
1. Super wear resistance
Its hardness is second only to diamond, and its service life is 20 times that of ordinary carbon steel pipe.
2. Never fall off, high reliability
Socket type connection between liner pipes, adhesive aging does not fall off, control the difference between high and low at the same time to reduce the risk of leakage.
3. Good integrity
Smooth inner wall, unobstructed airflow, less wear;Low pressure loss and high conveying efficiency.
4. Super corrosion resistance
There is no linear gap between the liner, and the viscose filling layer has good acid-base resistance.
5. Isolate iron and improve quality
The ceramic liner reduces the wear of the pipe and solves the problem of iron impurities in the powder due to the wear of the steel pipe.

Product features
Wear resistance: mohs hardness up to H7, 10 times of teflon.
Corrosion resistance: acid and alkali resistance, salt spray resistance, aging resistance, can be used in outdoor or high humidity and high heat conditions.
Easy to apply: single component, brush, roller and spray.
 
Ask: what technical requirement does wear-resisting pottery and porcelain tube have commonly?
Answer: centrifugal casting of composite ceramic pipe, centrifugal casting of composite ceramic pipe is the use of "self-combustion high temperature synthesis - high speed centrifugal technology" manufacturing of composite pipe, in high temperature and high speed formation of uniform, dense and smooth surface of the ceramic layer and transition layer.
 
Q: wear-resistant ceramic coating:
Answer: all kinds of wear-resisting and high-temperature ceramic coating, cement, used for all kinds of wear and corrosion fan volute, elbow pipe, coal mill outlet, thick and thin parts separator pipe, chute, hopper, valve.Nine, wear - resistant magnetic separation.

Q: wear - resistant ceramic pipe using isostatic molding what is the feature?
Answer ceramic tube is at present in the industrial production of wear-resisting tube preferred wear-resisting material, but its production process is more complex, wear-resisting ceramic tube is made of isostatic pressure mechanism, its precision is high, can make large pipe diameter, good compactness, long service life and other characteristics.

The operation process of isostatic pressure equipment is as follows: firstly, fill the prepared blank into a mold made of plastic or rubber, place it in a high-pressure container, seal it, and then drive the high-pressure liquid medium to transfer the pressure to the mold to pressurize the blank.Then release the pressure to take out the mold, and take out the formed blank from the mold.The liquid medium may be water, oil or glycerin.But should choose the medium with small compressibility to be advisable, if brake oil or anhydrous glycerine.Mould materials should be made of rubber with good oil resistance or similar plastics.