Standard for ceramic wear-resisting elbows

Time: 2019-02-14 Writer: mingrui

Quality standard requirements for ceramic wear-resisting elbows

Ceramic elbow a device used to connect pipes.It is the most ideal material for conveying particles or corroding raw materials.Therefore, the quality of ceramic elbow must be strictly controlled, so as to avoid accidents during transportation.The following will introduce the quality standard of ceramic elbow.

Control the radius of curvature is required.For example, if the radius length is 1.5d, then the radius of curvature must be within the required tolerance.Since most ceramic elbows are used for the connection between pipes, in order to improve the connection effect, the end is turned into a groove, leaving a certain Angle, with a certain edge, this requirement is also strict, the edge is much thicker, the Angle and the deviation range are specified, the geometric size of many more than the pipe.The surface quality and mechanical properties of the elbow are basically the same as those of the pipe.In order to improve the convenience of the link, the quality of ceramic elbow must be strictly controlled.

Previous：Introduction to elbow friction and impact
Next：Wear - resistant ceramic performance characteristics

Standard for ceramic wear-resisting elbows

Quality standard requirements for ceramic wear-resisting elbows

news

more +

Ceramic Information

Service Guarantee

Ceramic Display

Contact Us

Dongguan Mingrui Ceramic Technology Co., Ltd.