Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Ceramic Technology
  1. Market demand analysis of ceramic filling pumps

    Market demand analysis of ceramic filling pumps

    In the past few years, new industrial ceramic materials have been widely used in various industries. Especially in the pharmaceutical industry, ceramic filling pumps are essential for the filling of water injections, freeze-dried powders and... 2020-03-03
  2. Ceramic insert for car

    Ceramic insert for car

    Car is now very popular means of transportation, through the use of cars can have the effect of good speed, and in each car can have the use of car ceramic connector, the connector is mainly used as a circuit connection, disconnection, and o... 2020-02-28
  3. Fabrication and Characteristics Of Silicon Carbide Ceramic Spare Components

    Fabrication and Characteristics Of Silicon Carbide Ceramic Spare Components

    The properties of silicon carbide ceramic spare components are better than those of other ceramic spare parts in some industrial applications.In the market, there are many kinds of ceramic spare components, such as alumina ceramic parts, zir... 2020-02-28
  4. Where is the application of alumina ceramic chip

    Where is the application of alumina ceramic chip

    As we all know, the main raw material of alumina ceramic chip is alumina, with certain unique advantages.It is understood that alumina ceramic chip is a kind of material with high thermal conductivity and high insulation, thermal conductivit... 2020-02-19
  5. How zirconia probes work

    How zirconia probes work

    Zirconium oxide sensor is a zirconium oxide ceramic sensor used to measure the oxygen content in the flue gas of a large supercritical boiler.It is a large number of boiler oxygen content measurement equipment, simple structure and rapid res... 2020-02-19
  6. Metallization of zirconia ceramic rod

    Metallization of zirconia ceramic rod

    Zirconia ceramic rod is produced by isostatic pressing process, forming uniform, dense and smooth ceramic layer and transition layer at high temperature and high speed.Because of advanced technology and high cost, it is suitable for precisio... 2020-02-19
  7. What are the advantages of zirconia ceramic rods?

    What are the advantages of zirconia ceramic rods?

    Compared with other materials of the same type of products, ceramic bar has a large demand and a higher trend, because it has the following advantages. What are the advantages of ceramic rods? Strong weather resistance Ceramic rods using zi... 2020-01-17
  8. Where is the application of alumina ceramic chip?

    Where is the application of alumina ceramic chip?

    It is understood that alumina ceramic chip is a kind of material with high thermal conductivity and high insulation, thermal conductivity of 25W/m.k, withstand 13KV, (silicon film thermal conductivity of 0.6w/m.k. withstand 2KV) with extrao... 2020-01-17

Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

CONTACT US
在线客服系统