Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Hot keywords： Zirconia ceramic Alumina ceramic Ceramic plunger Ceramic parts
Ceramic Knowledge
Recommended products
  • Wear Resistance Zirconium Oxide Ceramic Plate Parts High Temperature Zirconia
    DETAILS CONTACT
  • Wear ceramic components abrasive resistant ceramic part hardness strength and goo
    DETAILS CONTACT
FAQ
Location：Home > Ceramic Knowledge > FAQ >
What are the factors that wear alumina ceramic structural parts?
Time: 2018-11-13   Writer: mingrui
What are the factors that wear alumina ceramic structural parts?

Alumina ceramic structural parts is a very wide range of products, the vast number of users fancy is its series of superior performance.
 
However, in the actual use of the process, alumina ceramic structural parts will inevitably be worn out, resulting in structural parts wear factors are many, from these aspects can effectively prevent the wear of alumina ceramic structural parts. It is understood that alumina ceramic mold is a major factor in wear and tear is a strong external forces. In the use of the product, once affected by the impact or pressure, it will lead to the alumina ceramic structural parts wear or breakage.
 
Therefore, as far as possible in the operation process to avoid its collision with the object, reduce damage.
 
Secondly, if the alumina ceramic structure is used for a long time, it will also produce a certain degree of wear, but this is a normal phenomenon, only need to be replaced after its wear and tear on the line, indicating that the service life of alumina ceramic structure expired.
 
In addition, the general environmental factors will also make alumina ceramic structural parts wear, the so-called general environmental factors should be the impact of the media in the environment, wind impact, temperature effects and so on, many times it is because of long periods of wind erosion to make structural parts wear. At the same time, it may be because of the effects of impurities in the environment, no matter what factors caused by the wear of alumina ceramic structural parts, it is necessary to overhaul and replace parts in a timely manner, does not affect the normal operation.

    news

    more +


Ceramic Information

Dynamic information Ceramic technology FAQ Ceramice exhibition

Service Guarantee

Ceramics quality Ceramics technical Ceramice after-sale Customer witness Patent certificate

Ceramic Display

Ceramic flange Ceramic bushing Ceramic plunger Ceramic pump valve

Contact Us

  2. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

Dongguan Mingrui Ceramic Technology Co., Ltd.

MB：181 2297 4730    Tel：86 769 85080316
Skype：admin@cerampart.com    Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City

Mobile version

CONTACT US
在线客服系统