Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer
Focus on Alumina / Zirconia ceramic parts R&D and production
+86 -181 2297 4730
Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer
Focus on Alumina / Zirconia ceramic parts R&D and production
+86 -181 2297 4730
Moble: +86 18122974730
Phone: +86 0769-85090316-8038
Email: admin@cerampart.comSkype: admin@cerampart.comWechat: +86 18122974730
Why use ceramic dispensing valves for dispensers?
The ceramic dispensing valve of the dispensing machine is formed by connecting the cylinder, the valve body and the discharging body up and down. The cylinder and the valve body are separated by a diaphragm to prevent the glue from invading ... 2019-01-07
How to properly detect ceramic plungers?
Check the tightness of the plunger. Hold the plunger sleeve with your hand, two fingers block the oil inlet on the top and side of the plunger, and use the other hand to pull out the plunger. If you feel a large suction force, gently release... 2019-01-07
Brief introduction of zirconia ceramic mobile phone back sheet forming process
Ceramics have been widely used in our life due to their excellent characteristics. Among them, zirconia ceramics is expected to lead the future of smart products such as mobile phone backboards, smart watches and fingerprint recognition. Tod... 2018-12-29
99 alumina ceramic processing difficulties and solutions
99 alumina ceramics refers to engineering ceramics with alumina content higher than 99%. According to the standard regulations, 99 alumina ceramic materials have high hardness, high strength, low expansion coefficient, and insulation, wear r... 2018-12-29
Ceramic substrate material with its excellent thermal conductivity and stability, which widely used in power electronics, electronic packaging, hybrid microelectronics and multi-chip modules and other fields.On the eve of today's industrial ...
2018-12-22
Application of zirconia ceramic nozzle in dispensing machine
The ceramic nozzle of the dispenser is to point a special adhesive in advance on the position of the patch needed on the PCB board to fix the patch element and then go through wave soldering after curing.Dispensing is carried out automatical... 2018-12-15
Polishing Method Of Zirconia Ceramic Surface Coating
In order to further improve the surface accuracy of zirconia ceramics, it is necessary to adopt the fine grinding technology to make zirconia ceramics reach the standard of use in all aspects through grinding.For zirconia ceramics with speci... 2018-12-15
Attention in inspection of zirconia ceramic structural parts
As we all know, zirconia ceramic structure parts refer to ceramic products made of zirconia powder and sintered.With its application more and more extensive, more and more products on the market, only quality is the hard truth.... 2018-12-08Dynamic information Ceramic technology FAQ Ceramice exhibition
Ceramics quality Ceramics technical Ceramice after-sale Customer witness Patent certificate
Ceramic flange Ceramic bushing Ceramic plunger Ceramic pump valve
MB：181 2297 4730 Tel：86 769 85080316
Skype：admin@cerampart.com Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City
Mobile version