Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Ceramic parts

Alumina Ceramic Parts custom and machinable AL2O3 alumina spare part components
  • Materials:Alumina (Al2O3) 95% - 99.99%
  • Sizes:Custom according to the drawings
  • Delivery times:2 -25 days(depends on the quantity)
  • Precision:Ra 0.1um tolerance: 0.001mm... etc
  • Features:Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation
  • Customized:Can be custom for special sizes and shapes
    1. Factory price and shipment within 24 hours In stocks
    2. MOQ:1qty
    3. Payment Term: PayPal; T/T; L/C etc.
    4. Shipment: by sea by air by courier by post etc.

Alumina ceramic parts custom and machinable AL2O3 alumina spare part components 


The al2o3 alumina ceramic parts as a kind of the industry equipment spare components was made of the mainly alumina ceramics raws:95% - 99.99%. The different chemical composition and structure of alumina ceramics determine their different special properties and functions, such as high strength, high hardness, high toughness, corrosion resistance, etc. 


Properties of Alumina/Aluminum Oxide (Al2O3)
1.Very good electrical insulation (1x1014 to 1x1015 Ωcm)
2.Moderate to extremely high mechanical strength (300 to 630 MPa)
3.Very high compressive strength (2,000 to 4,000 MPa)
4.High hardness (15 to 19 GPa)
5.Moderate thermal conductivity (20 to 30 W/mK)
6.High corrosion and wear resistance
7.Good gliding properties
8.Low density (3.75 to 3.9 g/cm3)
9.Operating temperature without mechanical load 1,000 to 1,500°C.
10.Bioinert and food compatible
 
Products and Aplications
– Pieces, Plates, Boards, Trays, etc. in Alumina-Ceramic / Cordierite-Mullite
– Tubes, Rods, Rollers, Supports, etc. in Alumina-Ceramic / Cordierite-Mullite
– Protection, Thermocouples, Insulation, etc. in Alumina-Ceramic / Cordierite-Mullite
– Pieces, Plates, Tubes, Rods, Rollers, etc. in Alumina Oxide
– others 


Alumina ceramic component parts customization:
Parts customization, due to the product size, material, processing accuracy and other requirements, resulting in the cost of materials, processing costs, packaging logistics costs will be different.

Please be sure to contact us when ordering, as much as possible to provide parts information (drawings or samples, use environment, etc.) and your requirements (quantity, delivery date, etc.), we will recommend for you to meet your requirements of the product program and quotation.

Our official e-mail:  admin@cerampart.com


Alumina Ceramic Parameters

Properties Unit Alumina (AL2O3)
AL2O3≥95 AL2O3≥99 AL2O3≥99.5 AL2O3≥99.8
Volumetric density g/cm3 3.7 3.80-3.85 3.85 3.9
Hardness HRA≥ 86 88 88 88
Flexural Strength Mpa≥ 300 350 400 400
Maximum temperature 1500 1500 1500 1500
Line expansion coefficient ×10-6/℃ 7.5 8.2 8.2 8.2
Dielectric constant εr(20℃,1MHz) 9 9.2 9.2 9.2
Media loss tanδ×10-4,1MHz 3 2 2 2
Volumetric resistivity Ω·cm(20℃) 1013 1014 1014 1014
Breakdown strength KV/mm,DC≥ 20 20 20 20
Acidic resistance mg/cm2≤ 0.7 0.7 0.7 0.7
Alkaline resistance mg/cm2≤ 0.2 0.1 0.1 0.1
Abrasion resistance g/cm2≤ 0.2 0.1 0.1 0.1
Compressive strength Mpa≥ 2500 2500 2500 2800
Flexural Strength Mpa≥ 200 350 350 350
Thermalcoefficient W/m·K(20℃) 20 25 25 25

 


Dimensional accuracy Up to 0.001mm
Smoothness Highest possible mirror
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Visual quality:
1. No cracks,  no dark dots, no contamination and sharp edges;
2. Evenly distributed glaze with very smooth surface

Properties :

1. High Hardness wear resistance
2. High precision
3. Good mechanical strength
4. High temperature and chemical resistance
5. Electric insulation
6. Low thermal expansion
7. Smooth surface finish
8. Thermal Shock Resistance 


Material :  
1. Alumina ceramic
95%-99.99% Al2O3
Lead-time: 15-25 days for mass production, 3-10 days for samples.

For more information about ceramics parts,please contact our engineers in time  >>>       
 
 



Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

CONTACT US
在线客服系统