Ceramic Tube / Ceramic Rod / Ceramic Plate / Ceramic Valve / Ceramic Plunger / Ceramic Pump Manufacturer

Focus on Alumina / Zirconia ceramic parts R&D and production

+86 -181 2297 4730

Email:admin@cerampart.com

Ceramic rod stock

 Best ceramic rod -advance ceramic manufacturer-- high quality - high precicion - factory price


We manufacture and sell high-quality, high-precision ceramic rods. Our ceramic rods are multi-size, multi-type and have a wide range of applications.
MOQ: 1 qty
Delivery time: within 2 days for in stocks
Payment Term: PayPal; T/T; L/C; etc.
Shipment: by sea, by air, by courier, by post, etc.
Price: depend on the quantity and sizes(Factory price)
Dimensions:0.393” to 21.654” (10mm – 550mm) length;Diameter as small as 0.2mm(can be customizations)

 
 
Ceramic components:
1. Alumina ceramic(Al2O3):
95%;96%;97%;98%;99%;99.5%:99.7%;99.9%
2. Zirconia ceramic(Zro2):
TTZ: Magnesia Partially Stabilized Zirconia (Zro2)
YTZP: Yttria Partially Stabilized Zirconia (Zro2)
ZDY: Yttria Fully Stabilized Zirconia (Zro2)
3. Silicon Carbide
4. Silicon Nitride
5. And others
The type of ceramic rod
Cylindrical, Square, Screw Threadand, Porous...
Shaft,Plunger Rod,Piston Rod,Cylinder Rod,Insulating Rod,Heat Conducting Bar,sharpening rod,honing rod...
Specification:
1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength, Wear Resistance Up To Mohz 9.0 Levels...
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture toughness
6. Pressure Resistance, Max 2300MPa compressive strength...
7. Anti-High Corrosion Resistance, Such As Acid  Alkali Resistance...
8. Long Service Life...
9. Other excellent property
The best-selling sizes are as follows in stock:
OuterDiameter (Inch)  Outer Diameter (mm) Maximum Length(Inch)/(mm) Price Ask for other sizes
0.011  0.28  3.94  100 Get the latest price contact us :admin@cerampart.com
0.020  0.51   3.15  80 Get the latest price contact us :admin@cerampart.com
0.022  0.56  6.69  170 Get the latest price contact us :admin@cerampart.com
0.024  0.61  5.12  130 Get the latest price contact us :admin@cerampart.com
0.029  0.74  5.91  150 Get the latest price contact us :admin@cerampart.com
0.030  0.76  1.97  50 Get the latest price contact us :admin@cerampart.com
0.035  0.89   2.76  70 Get the latest price contact us :admin@cerampart.com
0.040  1.02  7.48  190 Get the latest price contact us :admin@cerampart.com
0.041  1.04   6.30  160 Get the latest price contact us :admin@cerampart.com
0.043  1.09  3.54  90 Get the latest price contact us :admin@cerampart.com
0.048  1.22   4.33  110 Get the latest price contact us :admin@cerampart.com
0.056  1.42  5.51  140 Get the latest price contact us :admin@cerampart.com
0.063  1.60   3.15  80 Get the latest price contact us :admin@cerampart.com
0.072  1.83   9.84  250 Get the latest price contact us :admin@cerampart.com
0.096  2.44   12.20  310 Get the latest price contact us :admin@cerampart.com
0.125  3.18   17.72  450 Get the latest price contact us :admin@cerampart.com
0.137  3.48  19.69  500 Get the latest price contact us :admin@cerampart.com

Remarks
1. Up to 0.500″ Diameter tolerance ± 3% or ± 0.003″ (0.076 mm), whichever is greater. Straightness: camber / length < 0.003.
2. Diameter tolerance ± 5% or ± 0.030″ (0.76 mm), whichever is greater. Straightness: ≤ 0.006″/1.000″ cumulative.
3. Can be customezied for the other sizes,you can send your requirements (the drawing or pictures ) to our office emails: admin@cerampart.com

 

 

Additional Information
1.Discounts on large quantities of Ceramic Rod
2.Unit price and estimated ship dates will be calculated when the length and quantity are specified.
3.Minimum line item charge is applicable.
4.Typical response time is Max 24 hours.
5. In stock items will typically ship in 1 to 2 working days.

Customization and machining:
For different industries, equipment,and environment, ceramic rods have different function,We can manufacturing ceramic rod by drawing, such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement.  
Shaft plunger Pump plunger
Wear rod bar stick Pump plunger rod
Pins rod Water Pump plunger
Pump piston rod Plunger rod
Pump shaft rod Sleeve and bushing plunger
Machinable rods Other type rods
 
Send us a quick inquiry now to find out more information and the latest prices,the file by emails: admin@cerampart.com.thanks!
  • Ceramic materials(include but not limited belows)
    · 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
    · YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...

     

    Al 23
    ZrO2/Y2O3 ZrO2/MgO MgO SiC Si3N4 Reaction sintered Si3N4 Hot pressed ALN
    Physical properties                
    Density (g/cm3) 3,9 5,9 5,75 3,58 3,2 3,27 3,29 3,26
    Molecular weight (g/mole) 102 - - 40,4 40,1 140 140 41
    Maximum service temperature air (°C) 1700- 1800 1500 1000 2200 1500 1200- 1500 1100- 1600 1000- 1800
    Mechanical properties                
    Hardness (Mohs) 9 - - 5,5 9 - - 7
    Modulus of elasticity (GPa) 300-400 200 200 250-300 420 170-220 280-310 318
    Poisson's ratio 0,25 - - 0,18 0,14 0,25-0,26 0,27 0,25
    Fracture toughness (MPa.m1/2) 2-3 7-13 6-10 - 2,5-3,5 3,5-5 6,1 4,5
    Electrical properties                
    Dielectric constant 9-10 - - 9-10 - 10 10 9,2
    Electrical resistivity at 20°C (Ohm.cm) >10 14 10 13-10 14 >10 10 - 10 2-10 6 >10 7 10 12- 10 15 >10 14
    Dielectric strength (kV/mm) 10-20 9 2-10 - - - - 15
    Thermal properties                
    Specific heat (J/K/kg) 900 400-500 420 870-880 750 690 680-800 800
    Thermal conductivity (W/m/K) at 20°C 26-35 2,2-3,2 1,5-2,5 40-50 63-155 9-30 15-43 180
    Coefficient of thermal expansion ( 10-6) from 20 to 1000°C 8-9 10-11 5-16 10-13 4-5 3 3,3 4,4-5,3
    Melting point (°C) 2050 2590 - 2800 2500 1900 1900 2200
     

  • Ceramics are oxides, carbides, nitrides and borons of metal ions. Generally speaking, they are inorganic and non-metallic. Ceramics play an important role in our daily life. The development of ceramics has helped to reduce industrial demand. Compared with other materials, ceramics have some unique properties.
    Physical Properties:
    ·Volume

    ·Density
    ·Melting point
    ·Boiling point
    ·Heat capacity
    ·Index of reflection
    ·Porosity (also we refer pore size)
    Mechanical Properties:
    ·compressive strength
    ·shear strength
    ·fracture toughness
    ·elasticity or plasticity
    ·ductility
    ·Hardness
     
    Electrical Properties:
    ·dielectric strength
    ·electrical conductivity
    ·insulating properties
    ·semiconducting properties
    ·superconducting properties
    ·dielectric constant
     
    Thermal Properties:
    ·insulating properties
    ·semi-conducting properties
    ·thermal conductivity
    ·thermal expansion
    ·thermal shock resistance
    Chemical Properties:
    ·alkali attack resistance
    ·acid attack resistance
    ·corrosion resistances

     
    Other ceramic properties...

    Know more details of the ceramics property, contact us : admin@cerampart.com


  • Customization & Machining Service:
    As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by (email:admin@cerampart.com).

    Our Custom Capabilities:
    1.High Purity Martoxid Powder
    2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
    3.35000 ㎡workshop, annual output could reach hundred million pieces.
    4.All crafts are inspected strictly based on drawings,checked each month.
    5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
    Technical reference of manufacture
    Dimensional accuracy Up to 0.001mm
    Concentricity Up to 0.003mm
    Parallelism Up to 0.002mm
    The inner hole tolerance The minimum  0.005mm
    Straight flute The narrowest 0.1x100mm
    The thickness of the size Minimum to 0.02mm
    The screw thread Minimum internal thread M2
    Cylindricity Up to 0.004mm
    The linear tolerance Up to 0.001mm
    The smallest aperture The minimum 0.07mm
    Precision process CNC maching,grinding,lapping
    Surface finish Glazed,polishing or metallized


  • The general specifications service
    1. Factory price with a discounts
    2. Fast shipment within 24 hours
    3. In stocks for hot sales sizes
    4. MOQ:1qty
    The Custom service
    1. Can be custom for special sizes by drawing
    2. Can offer a samples within 2 days
    3. The delivery time within 20 days after confirmed the order
    4. Factory price and Senior ceramic engineer service
    FAQ
    1. Monthly Capacity: 50,000-60,000 pcs;
    2. Material: OEM or as per your suggestion;
    3. Lead time: about 7-20 days, pls confirm the quantities required;
    4. Incoterm: FOB, CFR, CIF;etc
    5. Delivery Cost: It is determinated by the destination port;
    6. Payment Term: PayPal; T/T; L/C; etc.
    7. Shipment: by sea, by air, by courier, by post, etc.

Contact Us

  1. 120.214.*.* - China/Henan - Ceramic rod

    69.243.*.* - America/Chicago - Ceramic tube

    140.233.*.* - America/New_York - Zirconia ceramic

    195.75.*.* - Europe/Madrid - Ceramic pin

CONTACT US
在线客服系统