E-mail：admin@cerampart.com

Ceramic rod

Ceramic rods multi szies hot sell 1mm 1.6mm 2.1mm 3.4mm 1.4mm 1.5mm alumina zirconia silicon rod tubes sticks

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC
  • Sizes：Mini-OD: 0.02mm;Max-length: 500mm
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

Ceramic Rod  Alumina Zirconia Rods


As a Professional Advanced Technology Ceramic Manufacturers, Us Support To Customize Different Specifications Of Ceramic Components

Brief Introduction:
Ceramic rod has the characteristics of high temperature resistance, cold resistance, wear resistance, corrosion resistance, electromagnetic insulation, non-oil self-lubrication, high speed and so on.It is widely used in aviation, aerospace, navigation, petroleum, chemical industry, automobile, electronic equipment, metallurgy, electric power, textile, pump, medical equipment, scientific research, national defense and military and other fields. It is a high-tech product for the application of new materials.

we can produce ceramic rods of different sizes, not limited to the following table.
The sizes of some ceramic rods are as follows :

Outer Diameter
(Inch)		 Outer Diameter
(mm)		 Length
(mm)(in)
0.011 0.28 10 0.39 
0.02 0.51 19 0.75 
0.022 0.56 150 5.91 
0.024 0.61 210 8.27 
0.096 2.44 230 9.06 
0.011 0.28 80 3.15 
0.02 0.51 20 0.79 
0.022 0.56 34 1.34 
0.024 0.61 53 2.09 
0.096 2.44 75 2.95 
0.125 3.18 90 3.54 
0.137 3.48 130 5.12 
0.083  2.1 110 4.33 
0.047  1.2 95 3.74 
0.126  3.2 84 3.31 
0.157  4 340 13.39 
0.236  6 210 8.27 
0.188 4.78 110 4.33 
0.197 5 95 3.74 
0.212 5.38 84 3.31 
0.25 6.35 340 13.39 
0.264 6.71 210 8.27 
0.327  8.3 110 4.33 
0.339  8.6 95 3.74 
0.354  9 84 3.31 
0.433  11 340 13.39 
0.551  14 210 8.27 
0.64 16.26 180 7.09 
0.75 19.05 360 14.17 
0.775 19.69 440 17.32 
1.1 27.94 520 20.47 
1.35 34.29 340 13.39 
Ceramic rods

The shapes of the ceramic rods we produce are as follows:
round, hexagon, square, semicircle, polygon, hole, etc. Can be customized

Dimension and Tolerance: 
· Diameter as small as 0.2mm， depends on length  
· Diameter tolerance we could make as fine as 0.001mm

As for the price, please provide the detailed requirements of the ceramic rod to us, such as: size, region, quantity, whether to customize and so on.If you provide detailed information, we will check all the costs and the delivery time is faster.

Custom service:
We are a professional manufacturer of ceramic rods, selling hot sizes of ceramic rods in stock, also support to customize different specifications of ceramic rods, according to the parameters or drawings provided by the customer.

Quick Free Quote . Our official E mail: admin@cerampart.com (Mr admin)

 

Specification:
1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength, Wear Resistance Up To Mohz 9.0; HRA 80-90...
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture toughness,
6. Pressure Resistance, Max 2300MPa compressive strength...
7. Anti-High Corrosion Resistance, Such As Acid  Alkali Resistance...
8. Long Service Life...
9. Other excellent property
 
Type of ceramic rod us manufacturer (including but not only belows)

Shaft plunger Pump plunger
Wear rod Filling Pump plunger
Pins rod Water Pump plunger
Piston rod Plunger rod
Shaft rod Sleeve and bushing rod
Machinable rod Others
Tip:
For different industries, equipment,and environment, ceramic rod have different function,
We can machining ceramic rod , such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement.    

 

Properties Unit Alumina (AL2O3) Zirconia(ZrO2)
AL2O3≥95 AL2O3≥99 AL2O3≥99.5 AL2O3≥99.8 ZTA YTZ
Volumetric density g/cm3 3.7 3.80-3.85 3.85 3.9 3.8-4.6 6
Hardness HRA≥ 86 88 88 88 86-88 88-90
Flexural Strength Mpa≥ 300 350 400 400 172-450 900
Maximum temperature ℃ 1500 1500 1500 1500 1400-1500 1500
Line expansion coefficient ×10-6/℃ 7.5 8.2 8.2 8.2    
Dielectric constant εr(20℃,1MHz) 9 9.2 9.2 9.2    
Media loss tanδ×10-4,1MHz 3 2 2 2    
Volumetric resistivity Ω·cm(20℃) 1013 1014 1014 1014 1013 1014
Breakdown strength KV/mm,DC≥ 20 20 20 20    
Acidic resistance mg/cm2≤ 0.7 0.7 0.7 0.7    
Alkaline resistance mg/cm2≤ 0.2 0.1 0.1 0.1    
Abrasion resistance g/cm2≤ 0.2 0.1 0.1 0.1    
Compressive strength Mpa≥ 2500 2500 2500 2800 2300-2900 2500
Flexural Strength Mpa≥ 200 350 350 350    
Elastic modulus Gpa 300 350 350 350    
Poisson-Pine ratio   0.2 0.22 0.22 0.22    
Thermalcoefficient W/m·K(20℃) 20 25 25 25    
 
 
Precision of manufacture
Dimensional accuracy Up to 0.001mm
Smoothness Highest possible mirror
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Precision process CNC maching,grinding,lapping
Surface finish Glazed,polishing or metallized
Visual quality:
1. No cracks,  no dark dots, no contamination and sharp edges;
2. Evenly distributed glaze with very smooth surface


Customization & Machining Service
As a professional manufacturer of industrial ceramic components.We can custom the sepcial specifications of ceramic rod,tube,bar or other ceramic parts.High quality,Factory price, on-time delivery, High composition of ceramics

FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-10 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
 

For more information about ceramics rods,please contact our engineers in time  >>>       

Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City