Ceramic tube for oxygen sensors zirconia alumina ceramic tubes

Ceramic tube for oxygen sensors will be uses in a wide range of applications, including, control of atmosphere in materials processing and control of air-to-fuel ratio in combustion.

As a ceramic tube for sensors factory, us produce and sales multi sizes ceramic tube for multi types oxygen sensors.also we support to offer custom service for our oxygen sensors ceramic tubes customers.

Stabilised Yttria zirconia (FSZ) material is used to produce a wide range of components for applications in oxygen sensors. Typically these include thin walled, open and closed end tubes, flat plates and sheets.

Applications of Ceramic tube for oxygen sensors
Fuel combustion efficiency control
Furnace gas analysis
Heated or unheated probes
Waste management systems
Temperature and oxygen control of kilns
Carburising (heat transfer) furnace control
Potters' kilns
Annealing furnaces
Large and small electric kilns
Flue gas analysis
O2 levels at high temperatures
CO2 harsh environments
Technical ceramic kiln systems
Industrial applications
Metal heat treatment processes
Molten systems (single use only)
Copper reverberator

We offer a selection of ceramic materials for oxygen sensor tube as follows:
 Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc.
· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)   · YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)


The sizes of oxygen sensor tube we produce:
produced by customer requipments
 

FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about ceramics  ceramic tube for sensors parts,please contact our engineers in time  >>>

Ceramic tube for oxygen sensors Atmosphere control using a dedicated monitor requires operation at low partial pressure of oxygen and temperatures in the range 800°C-1200°C. The gas carburising process used to harden steel components is a typical application. However at the high end of this temperature range the electronic conductivity can become significant.