Standard for ceramic wear-resisting elbows

Time：202019-02-14

Quality standard requirements for ceramic wear-resisting elbows

Ceramic elbow a device used to connect pipes.It is the most ideal material for conveying particles or corroding raw materials.Therefore, the quality of ceramic elbow must be strictly controlled, so as to avoid accidents during transportation.The following will introduce the quality standard of ceramic elbow.

Control the radius of curvature is required.For example, if the radius length is 1.5d, then the radius of curvature must be within the required tolerance.Since most ceramic elbows are used for the connection between pipes, in order to improve the connection effect, the end is turned into a groove, leaving a certain Angle, with a certain edge, this requirement is also strict, the edge is much thicker, the Angle and the deviation range are specified, the geometric size of many more than the pipe.The surface quality and mechanical properties of the elbow are basically the same as those of the pipe.In order to improve the convenience of the link, the quality of ceramic elbow must be strictly controlled.

information

Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City