Wear Ceramic Plates High Mechanical Strength Abrasion Resistance Alumina Zirconia Plates

Wear abrasion resistant of ceramic plates
The Wear ceramic plate is better wear and abrasion resistant property than metal. The wear ceramic plate hardness (mohs)up to 9, HRA 80-90. Ceramic hardness is not second only to diamond, but far beyond the wear resistance of steel and stainless steel.

we are a precision wear ceramic plates factory which produce wear resistance ceramic plates according to customer requirements. 


Our advantage
OEM factory, High quality, Precision processing, Pipelining assembly, 100% QC process, Plentiful stocks, Fast and Safe shipping.

Advantages of Wear ceramic plate:

1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength Up To Mohs 9.0; HRA 80-90, Wear Resistance wear rate 0.68 mm³·m^-2·h^-1....
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture toughness,
6. Pressure Resistance, Max 2300MPa compressive strength...
7. Anti-High Corrosion Resistance, Such As Acid  Alkali Resistance...
8. Long Service Life...
9. Other excellent property
 

Part of Wear ceramic plate us manufacturer available sizes(include but not limited belows)

Other type of ceramic sheet/ plate/ substrate/ piece/ blank · Ttz: Magnesia Partially Stabilized Zirconia (Zro2)  Sheet/ Plate/ · Ytzp: Yttria Partially Stabilized Zirconia (Zro2) Sheet/ Plate/ · Zdy: Yttria Fully Stabilized Zirconia (Zro2) Sheet/ Plate/ · Silicon Carbide Sheet/ Plate/ · Silicon Nitride Sheet/ Plate/ Produce and machining We can produce different sizes and shapes of the wear ceramic plates for specific applications to different custom wear ceramic plate products.Such as drilling, polishing, stripes, concave and convex, screw holes, metal parts position and so on Dimension  Length as long as 350mm Thickness as thin as 0.2mm，depends on length and width Length and thickness tolerance we could make as fine as 0.001mm

Application of wear ceramic plate
Wear ceramic plate can be used for a device or equipment in the special environment such as Power isolation, high temperature protection, durable wear, high and low temperature impact etc...and for the different device should be requiry different ceramic sheet shapes, like: some device need the round sheet be machining 8 hole to fasten to the box.

Delivery: 
Arrange shipment of stock products within 2 days
Custom OEM will be shipped within 15 days after determining the parameters  
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations （the price,delivery time,moq etc）about the ceramic wear plates, please contact us or email:admin@cerampart.com

---

Availible Ceramic materials of wear ceramic plate(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...

 

Customization & Machining Service: As a wear ceramic plate manufacturer,us offer a wide of the wear ceramic plate specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by EMAIL. Our Custom Capabilities: 1.High Purity Martoxid Powder 2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience 3.35000 ㎡workshop, annual output could reach hundred million pieces. 4.All crafts are inspected strictly based on drawings,checked each month. 5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.

Technical reference of manufacture Dimensional accuracy Up to 0.001mm Concentricity Up to 0.003mm Parallelism Up to 0.002mm The inner hole tolerance The minimum  0.005mm Straight flute The narrowest 0.1x100mm The thickness of the size Minimum to 0.02mm The screw thread Minimum internal thread M2 Cylindricity Up to 0.004mm The linear tolerance Up to 0.001mm The smallest aperture The minimum 0.07mm Precision process CNC maching,grinding,lapping Surface finish Glazed,polishing or metallized

FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about wear ceramic plates,please contact our engineers in time  >>>