E-mail：admin@cerampart.com
Ceramic Dowel Pin High Strength Performance Silicon Nitride Al2o3 Zro2 Dowel Pins
- Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
- Sizes：Mini-OD: 0.02mm;Max-length: 500mm
- Delivery times：2 -25 days(depends on the quantity)
- Precision：Ra 0.1um tolerance: 0.001mm... etc
- Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation
Ceramic Dowel Pin High Strength Performance Silicon Nitride Al2o3 Zro2 Dowel Pins
OEM And Custom The Ceramic Parts And Components With Your Drawing Or Demand
Ceramic dowel pin is used as guide pin on projection nut welding.It adopt silicon nitride，AL2O3,ZrO2 etc.ceramic material.With good insulation performance,ceramic dowel pin protect electrode when welding workpiece.But due to ceramic is fragile,more and more dowel pin use KCF material.
Ceramic Dowel Pin Technical Specification
|
Pins Diameter:M4,M5,M6,M8,M10,M12… Type of Ceramic Dowel Pins:Straight Dowel; Oversize Dowel ; Undersize Dowel; Pull; Dowel Pin; Groove Pin |
 |
Part of us products dowel pins:
Diameter tolerance of cylindrical dowel pins (parallel pins)
| nominal | 0.6 | 0.8 | 1 | 1.2 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A type(dm6) | min | 0.602 | 0.802 | 1.008 | 1.002 | 1.502 | 2..002 | 2.502 | 3.002 | 4.004 | 5.004 | 6.004 | |
| max | 0.608 | 0.808 | 1.008 | 1.008 | 1.508 | 2.008 | 2.508 | 3.008 | 4.012 | 5.012 | 6.012 | ||
| B type(dh8) | min | 0.586 | 0.786 | 0.986 | 1.486 | 1.486 | 1.986 | 2.486 | 2.986 | 3.982 | 4.982 | 5.982 | |
| max | 0.6 | 0.8 | 1 | 1.2 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | ||
| C type(dh11) | min | 0.54 | 0.74 | 0.94 | 1.14 | 1.44 | 1.94 | 2.44 | 2.94 | 3.925 | 4.925 | 5.925 | |
| max | 0.6 | 0.8 | 1 | 1.2 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | ||
| D type(du8) | min | 0.618 | 0.818 | 1.018 | 1.218 | 1.518 | 2.018 | 2.44 | 3.018 | 4.023 | 5.023 | 6.023 | |
| max | 0.632 | 0.832 | 1.032 | 1.223 | 1.523 | 2.032 | 2.532 | 3.032 | 4.041 | 5.041 | 6.041 | ||
| 8 cylindrical dowel pins (parallel pins) | |||||||||||||
length tolerance of cylindrical dowel pins (parallel pins)
| L | min | max | L | min | max | L | min | max | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2.75 | 3.25 | 4 | 3.75 | 4.25 | 5 | 4.75 | 5.25 | ||
| 6 | 5.75 | 6.25 | 8 | 7.75 | 8.25 | 10 | 9.75 | 10.25 | ||
| 12 | 11.5 | 12.5 | 14 | 13.5 | 14.5 | 16 | 15.5 | 16.5 | ||
| 18 | 17.5 | 18.5 | 20 | 19.5 | 20.5 | 22 | 21.5 | 22.5 | ||
| 24 | 23.5 | 24.5 | 26 | 25.5 | 26.5 | 28 | 27.5 | 28.5 | ||
| 30 | 29.5 | 30.5 | 32 | 31.5 | 32.5 | 35 | 34.5 | 35.5 | ||
| 40 | 39.5 | 40.5 | 45 | 44.5 | 45.5 | 50 | 49.5 | 50.5 | ||
| 55 | 54.25 | 55.75 | 60 | 59.25 | 60.75 | 65 | 64.25 | 65.75 | ||
| 70 | 69.25 | 70.75 | 75 | 74.25 | 75.75 | 80 | 79.25 | 80.75 | ||
| 85 | 84.25 | 85.75 | 90 | 89.25 | 90.75 | 95 | 94.25 | 95.75 | ||
| total | 4 cylindrical dowel pins (parallel pins) | |||||||||
Tips: OEM ceramic pins, Fast delivery on orders , Business to business, Quick & easy to order
High-consistency and extremely low tolerance dowel pins are ideal for critical fixture construction where precise and accurate placement is critical.
Dowel pins, made of Silicon Nitride (shown above, in white) are available in h6, m5 and m6 tolerances per DIN 6325 and m6 tolerances per ISO 2338. The Z-101 has a high tensile strength, low heat conductivity and high maximum operating temperature to make it suitable for many different applications.
· 95%--99.99% Alumina (Al2O3) · Silicon Carbide · Silicon Nitride · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2) · ZDY: Yttria fully stabilized Zirconia (ZrO2)...
|
|
Al 2O 3 |
ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN |
| Physical properties | ||||||||
| Density (g/cm3) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
| Precision of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Smoothness | Highest possible mirror |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
|
Visual quality: 1. No cracks, no dark dots, no contamination and sharp edges; 2. Evenly distributed glaze with very smooth surface |
|
Customization & Machining Service
As a professional manufacturer of industrial ceramic components.We can custom the sepcial specifications of ceramic pins or other ceramic parts.High quality,Factory price, on-time delivery, High composition of ceramics
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-10 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
| For more information about ceramics parts,please contact our engineers in time >>> |
  |
Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City
HOME
WHATSAPP
CONTACT
TEL