E-mail：admin@cerampart.com

Ceramic tube

Ceramic tube for heater heating element

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes：length: 500mm;etc
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

Ceramic Tube Heater Industry Alumina Ceramic Heater Heating Element
 

As a Professional Advanced Technology Ceramic Manufacturers, 
Us Support To Customize Different Specifications Of Ceramic Components

- Features -

Ceramic Heater Tube is used as basic material (Principal features of KN-101)

 

FIR Tube Heater Specifications

Power (W): 20~1000W

Length (mm): 10~1000mmL

Diameter(mm): 8 / 10 / 12 / 14 / 16 / 18 / 20 /22mm

Length(mm): 10~1500mm

Voltage(V): 110V, 220V,  230V, 240V, 380V

 

FIR Tube Heater Applications

Industrial Use - drying, dehumidification during production

Medical Use - medical lamp, sauna for pain relief

Home Appliances - baking oven, sauna
 

Variety of type

(A) Vertical type : Two kinds of Metal Flange Type and One Body Ceramic Type

are prepared

(B) Horizontal type : Tapered end by one piece forming is provided on demand

(C) Pencil type : Small diameter of 28 and 30mm are provided

*All types can be applied to tubes equipped with heater

Wide range of dimension

(Maximum dimension) Inner diameter 350mm , Length 1300mm

(Current available dimension) Others are available upon request

*Thickness : Standard wall thickness is 10mm

 

Rapid Up Heating Ceramic Heater Tube Technical Ceramic Tube Heater With Vertical , Horizontal And Pencil Type

 

As a the manufacturer of ceramic tubes, us offer a wide the type or sizes of the ceramic tube heater for industry machinable and parts applications.our ceramic tubes are made of Zirconia, Alumina, Silicon and other advanced ceramics. In stocks and the special specifications can be customized.

 

The general specifications service
1. Factory price with a discounts
2. Fast shipment within 24 hours
3. In stocks for hot sales sizes
4. MOQ:1qty
5. Online service      		 The Custom service
1. Can be custom for special sizes by drawing
2. Can offer a samples within 2 days
3. The delivery time within 20 days after confirmed the order
4. Factory price and Senior ceramic engineer service
5. Online service      

Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...

 
Al 2O 3		 ZrO2/Y2O3 ZrO2/MgO MgO SiC Si3N4 Reaction sintered Si3N4 Hot pressed ALN
Physical properties                
Density (g/cm3) 3,9 5,9 5,75 3,58 3,2 3,27 3,29 3,26
Molecular weight (g/mole) 102 - - 40,4 40,1 140 140 41
Maximum service temperature air (°C) 1700- 1800 1500 1000 2200 1500 1200- 1500 1100- 1600 1000- 1800
Mechanical properties                
Hardness (Mohs) 9 - - 5,5 9 - - 7
Modulus of elasticity (GPa) 300-400 200 200 250-300 420 170-220 280-310 318
Poisson's ratio 0,25 - - 0,18 0,14 0,25-0,26 0,27 0,25
Fracture toughness (MPa.m1/2) 2-3 7-13 6-10 - 2,5-3,5 3,5-5 6,1 4,5
Electrical properties                
Dielectric constant 9-10 - - 9-10 - 10 10 9,2
Electrical resistivity at 20°C (Ohm.cm) >10 14 10 13-10 14 >10 10 - 10 2-10 6 >10 7 10 12- 10 15 >10 14
Dielectric strength (kV/mm) 10-20 9 2-10 - - - - 15
Thermal properties                
Specific heat (J/K/kg) 900 400-500 420 870-880 750 690 680-800 800
Thermal conductivity (W/m/K) at 20°C 26-35 2,2-3,2 1,5-2,5 40-50 63-155 9-30 15-43 180
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C 8-9 10-11 5-16 10-13 4-5 3 3,3 4,4-5,3
Melting point (°C) 2050 2590 - 2800 2500 1900 1900 2200

 

Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by EMAIL.

Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
 		  
Technical reference of manufacture
Dimensional accuracy Up to 0.001mm
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Precision process CNC maching,grinding,lapping
Surface finish Glazed,polishing or metallized
 


FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about ceramics parts,please contact our engineers in time  >>>       
 
 
Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：181 2297 4730 Tel：86 769 85080316
Skype：admin@cerampart.com
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City