E-mail：admin@cerampart.com

Ceramic smart wear

Custom Ceramic Ring White Wearable Ring blank Parts

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes：Custom according to the drawings
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

Custom Ceramic Ring White Wearable Ring blank Parts

 
Zirconia ceramic is the most mature of the engineering ceramics, offering excellent electrical
insulation properties together with high hardness and good wear resistance,but relatively low
strength and fracture toughness.Alumina ceramics are generally white but may also be pink or
ivory.The color of Custom Ceramic Ring White Wearable Ring blank Parts is derived from either the sintering additives or impurities in the raw materials.
 
1. High hardness.
2. High heat resistance : Alumina ceramic has excellent thermal stability,which means that it is
widely used in areas where resistance to high temperatures is essential.
3. Good wear resistance : Alumina ceramic is the material of choice for alumina wear parts.
4. High electrical resistivity : Alumina is an electrically insulating material.
5. High corrosion resistance : It is insoluble in water and only slightly soluble in strong acid and
alkaline solutions. Good chemical stability of alumina leads to high corrosion resistance.


Materials parameter:
Property Alumina  Property Zirconia
Bulk density(g/cm3) 3.85-3.93 The density (g/cm3) 6.05
Hardness(HRA≥) 86 Bibulous rate(%) 0
Bending strength（Mpa≥） 300 Thermal expansion coefficient(10-6 /k) 10.5
Maximum service temperature（℃） 1500 Young's modulus of elasticity(Gpa) 210
Linear expansion coefficient（×10-6/℃） 7.15-7.67 Poisson's ratio(/) 0.3
Dielectric constant（εr(20℃,1MHz)） 9.21 Hardness (MPa) 1200
Dielectric loss（tanδ×10-4,1MHz） 2.5 Bending strength (MPa) 950
Volume resistivity（Ω·cm(100℃)） 9.2*1016 The bending strength (MPa) 210
The compressive strength（Mpa≥） 2500 Compressive strength (MPa) 2000
Flexural strength（Mpa≥） 200 Fracture toughness(Mpa.m1/2) 10
Modulus of elasticity（Gpa） 300 Thermal conductivity (W/m.k) 2
Poisson's ratio 0.2 Specific resistivity(Ω.mm2/m) ＞1015
Thermal conductivity Coefficient(W/m·K(20℃)) 20 Maximum service temperature(℃) 1350
Dc breakdown strength 43.7 Acid and alkali corrosion resistance(/) strength
Tensile seal strength(Mpa) 104.4    

Dimensional accuracy Up to 0.001mm
Smoothness Highest possible mirror
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Visual quality:
1. No cracks,  no dark dots, no contamination and sharp edges;
2. Evenly distributed glaze with very smooth surface

Properties :

1. High Hardness wear resistance
2. High precision
3. Good mechanical strength
4. High temperature and chemical resistance
5. Electric insulation
6. Low thermal expansion
7. Smooth surface finish
8. Thermal Shock Resistance 

Material :  
1. Alumina ceramic
2. Zirconia ceramic
3. Silicone carbide
4. Silicone nitride
Lead-time: 20-30 days for mass production, 7-15 days for samples.
 

Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City