E-mail：admin@cerampart.com
Insulation Sheet Thermal Conductivity High Temperature Resistant Ceramic Sheet
- Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
- Sizes：Max Length/width:450mmThickness:0.2mm...
- Delivery times：2 -25 days(depends on the quantity)
- Precision：Ra 0.1um tolerance: 0.001mm... etc
- Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation
Insulation Sheet Thermal Conductivity High Temperature Resistance High Voltage Electrical Insulating Ceramic Sheet
The ceramic sheet have best perfoamance with thermal conducticity, electrial insulating, high heat temperature resistance and other features than metal raws.
Features of ceramic:
1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength Up To Mohs 9.0; HRA 80-90, Wear Resistance wear rate 0.68 mm3·m-2·h-1....
3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture toughness,
6. Pressure Resistance, Max 2300MPa compressive strength...
7. Anti-High Corrosion Resistance, Such As Acid Alkali Resistance...
8. Long Service Life...
9. Other excellent property
Electrical insulating ceramic sheet made by advance technical ceramics,like:95%--99.99% Alumina(Al2O3), Zirconia(ZrO2) ,Silicon Carbide,Silicon Nitride ...etc which have a excellent Physical properties,Mechanical properties,Electrical properties,Thermal properties. Wear hardness strength resistance.
Types of Insulation Sheet: alumina sheet ; zirconia sheet...
Size:Maximum length as 450mm; Thinnest thickness as 0.02mm; Widest width as 450mm
Shape: Rectangle, square, circle, semicircle, irregular, customizable
Electrical insulating ceramic sheet have a excellent ceramic propety, insulating Electrical Resistivity Up To 10∧14 Ohm.Cm, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF), 155 Thermal conductivity (W/m/K); 220v - 360v High Voltage...
Produce and machining
We can produce different sizes and shapes of the sheets for specific applications to different custom products.Such as drilling, polishing, stripes, concave and convex, screw holes, metal parts position and so on
Parts of our manufacturer sizes (not limited to belows)
| Length | Width | Thickness | Length | Width | Thickness |
| 100mm | 100mm | 3mm | 100mm | 100mm | 6mm |
| - | 25mm | 2mm | - | 50mm | 2mm |
| 50mm | 50mm | 1mm | 50mm | 50mm | 2mm |
| 100mm | 100mm | 10mm | Shape: square, round, oval, flat, strip, porous, irregular, etc | ||
Application
Ceramic sheet can be used for a device or equipment in the special environment such as Power isolation, high temperature protection, durable wear, high and low temperature impact etc...and for the different device should be requiry different ceramic sheet shapes, like: some device need the round sheet be machining 8 hole to fasten to the box.
Our Customers
OEM ceramic spare components and enjoys on-going relationships with businesses of all sizes in dozens of industries, in addition to the markets showcased at the top of this page, including:
§ Cable & Fiber Optics
§ Electric & Gas Welding Equipment
§ Electrical Apparatus & Wiring
§ Investment Casting
§ Infrared Equipment
§ Microwave Equipment
§ Refractory Furnaces
§ Thermocouples
§ Semiconductors
§ Soldering Equipment
§ Spare components for equipment parts
Ceramics offer many advantages compared to other materials. They are harder and stiffer than steel; more heat and corrosion resistant than metals or polymers; less dense than most metals and their alloys; and their raw materials are both plentiful and inexpensive. Ceramic materials display a wide range of properties which facilitate their use in many different product areas.
Aerospace:
space shuttle tiles, thermal barriers, high temperature glass windows, fuel cells.
Consumer Uses:
glassware, windows, pottery, Corning¨ ware, magnets, dinnerware, ceramic tiles, lenses, home electronics, microwave transducers.
Automotive:
catalytic converters, ceramic filters, airbag sensors, ceramic rotors, valves, spark plugs, pressure sensors, thermistors, vibration sensors, oxygen sensors, safety glass windshields, piston rings.
Medical (Bioceramics):
orthopedic joint replacement, prosthesis, dental restoration, bone implants.
Military:
structural components for ground, air and naval vehicles, missiles, sensors.
Computers:
insulators, resistors, superconductors, capacitors, ferroelectric components, microelectronic packaging.
Other Industries:
bricks, cement, membranes and filters, lab equipment
Communications: fiber optic/laser communications, TV and radio components, microphones...
|
The general specifications service 1. Factory price with a discounts 2. Fast shipment within 24 hours 3. In stocks for hot sales sizes 4. MOQ:1qty 5. Online service  |
The Custom service 1. Can be custom for special sizes by drawing 2. Can offer a samples within 2 days 3. The delivery time within 20 days after confirmed the order 4. Factory price and Senior ceramic engineer service 5. Online service  |
Machining process
Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector
Mingrui ceramic parts property
| · Flexural strength | · Chemical resistance | · Electrical insulation | · Corrosion resistance | · Dielectric strength |
| · Wear resistance | · Temperature resistance | · Thermal conductivity | · High voltage | · Hardness... |
· 95%--99.99% Alumina (Al2O3) · Silicon Carbide · Silicon Nitride · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2) · ZDY: Yttria fully stabilized Zirconia (ZrO2)...
|
|
Al 2O 3 |
ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN |
| Physical properties | ||||||||
| Density (g/cm3) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
|
Customization & Machining Service: As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!! or up a files by EMAIL. Our Custom Capabilities: 1.High Purity Martoxid Powder 2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience 3.35000 ㎡workshop, annual output could reach hundred million pieces. 4.All crafts are inspected strictly based on drawings,checked each month. 5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc. |
|
|||||||||||||||||||||||||||
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
| For more information about ceramics parts,please contact our engineers in time >>> |
  |
Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City
HOME
WHATSAPP
CONTACT
TEL