E-mail：admin@cerampart.com

Ceramic mould injection part

Ejector Guide Pins Hardness Strength And Reduces Wear Molding Ceramic Ejector Guide Pin Rods

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes：Custom according to the drawings
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

Ejector Guide Pins Hardness Strength And Reduces Wear Molding Ceramic Ejector Guide Pin Rods

Custom Alumina Zirconia ceramic mould injection parts

High precision Alumina Zirconia Ceramic Mould Injection Parts OEM


Ceramic Ejector guide pin for injection performs extremely well in extremely high pressure, high strength, abrasion and high temperature environments, much better than metal materials.

The ceramic ejector guide pin is also known as the push plate guide pin and ACTS as a guide for the ejector plate to slide.Because the injector guide bush slides, a hard material is used.The ceramic injector guide bushing is also known as the push plate guide tube.It is a cylindrical part used to position the injector by matching the guide pin.

The purpose of ceramic ejector guide system (Pin & Bush) is to align & take the pressure of Return Pin, Ejector Pin & Sprue Puller Pin. 
The ceramic injection guide bush is located between Ejector & Ejector Retainer Plate and the Guide Pin is either guided or bolted in Bottom Plate or in Support Plate.


The main materials of the ceramic ejector pins:
· 95%--99.99% Alumina (Al2O3)   
· Silicon Carbide   
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)

Part of us oem ceramic guide pin sizes(include but not limited belows)
OuterDiameter (Inch) Outer Diameter (mm) Maximum Length
0.011 0.28 12in / 305mm
0.020 0.51 12in / 305mm
0.022 0.56 12in / 305mm
0.024 0.61 12in / 305mm
0.029 0.74 12in / 305mm
Dimension and tolerance of oem :  
·Diameter as small as 0.2mm， depends on length  
·Length as long as 400mm, as short as 0.5mm
·Diameter tolerance we could make as fine as 0.001mm
The length, thickness , diameter and shape of the ceramic plates are customized.

Type of Ejector ceramic guide pins
Retaining ring type
JIS centering location type
JIS stuck-out type
Centering location type 
Stuck-out type

Ejector Component List 
this list is standard minimum to make ejector system
1. Ejector plate, place for ejector and ejector guide bush, shoulder bolts and return pin.
2. Ejector Backing Plate, place for clamping the ejector and push back the ejector.
3. return pin, push the ejector plate and ejector backing plate to first position.
4. spring in return pin, to make sure and holds the ejector plate so it's always in back position, when in assembling process, it can lift up the ejector pin, and ejector plate so the position always in back, give the little preloads to ejector plate to make sure the ejector plate position.
5. shoulder bolts, first time lock in assembling molds
6. ejector pin, eject and push the product from core.
7. ejector guide pin, guide the moving of ejector plate.
8. ejector guide pin bush, to make sliding and prevent large contact when moving.
9. support pillar, to prevent large deflection of core plate when injecting the plastic material process held.
10. ejector rod, contact with rod in injection machine, this also passing force from injection machine to ejector plate.
11. ejector bolts, to tie up between ejector plate and ejector backing plate.


Delivery: 
Custom OEM will be shipped within 15 days after determining the parameters  
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations （the price,delivery time,moq etc, please contact us or email:admin@cerampart.com

Machining process
Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector

Mingrui ceramic parts property
· Flexural strength · Chemical resistance · Electrical insulation · Corrosion resistance · Dielectric strength
· Wear resistance · Temperature resistance · Thermal conductivity · High voltage · Hardness...
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...

 
Al 2O 3		 ZrO2/Y2O3 ZrO2/MgO MgO SiC Si3N4 Reaction sintered Si3N4 Hot pressed ALN
Physical properties                
Density (g/cm3) 3,9 5,9 5,75 3,58 3,2 3,27 3,29 3,26
Molecular weight (g/mole) 102 - - 40,4 40,1 140 140 41
Maximum service temperature air (°C) 1700- 1800 1500 1000 2200 1500 1200- 1500 1100- 1600 1000- 1800
Mechanical properties                
Hardness (Mohs) 9 - - 5,5 9 - - 7
Modulus of elasticity (GPa) 300-400 200 200 250-300 420 170-220 280-310 318
Poisson's ratio 0,25 - - 0,18 0,14 0,25-0,26 0,27 0,25
Fracture toughness (MPa.m1/2) 2-3 7-13 6-10 - 2,5-3,5 3,5-5 6,1 4,5
Electrical properties                
Dielectric constant 9-10 - - 9-10 - 10 10 9,2
Electrical resistivity at 20°C (Ohm.cm) >10 14 10 13-10 14 >10 10 - 10 2-10 6 >10 7 10 12- 10 15 >10 14
Dielectric strength (kV/mm) 10-20 9 2-10 - - - - 15
Thermal properties                
Specific heat (J/K/kg) 900 400-500 420 870-880 750 690 680-800 800
Thermal conductivity (W/m/K) at 20°C 26-35 2,2-3,2 1,5-2,5 40-50 63-155 9-30 15-43 180
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C 8-9 10-11 5-16 10-13 4-5 3 3,3 4,4-5,3
Melting point (°C) 2050 2590 - 2800 2500 1900 1900 2200

 

Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by EMAIL.

Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
 		  
Technical reference of manufacture
Dimensional accuracy Up to 0.001mm
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Precision process CNC maching,grinding,lapping
Surface finish Glazed,polishing or metallized
 


FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about ceramics parts,please contact our engineers in time  >>>       
 
 
Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City