E-mail：admin@cerampart.com

Ceramic mould injection part

Injection Parting Lock Friction Force Hardness Strength Plastics Injection Mold Ceramic Parting Lock

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes：Custom according to the drawings
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

Injection Parting Lock Friction Force Hardness Strength Plastics Injection Mold Ceramic Parting Lock


Custom Alumina Zirconia ceramic mould injection parts

High precision Alumina Zirconia Ceramic Mould Injection Parts OEM


Parting lock in plastics injection mold is an equipment that use to fix cavity plate and core plate when mold open. It creates the friction force to help cavity plate open more slowly.

ceramic prating lock made from advance technical ceramics with excellent firction , hardness strength , anti heat temperatures and others propertys.  including alumina, zirconia, and silicon carbide. Enhance performance and product life by using the material best suited to your application.

The main materials of the injection ceramic part lock:
· 95%--99.99% Alumina (Al2O3)   
· Silicon Carbide   
· Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)

Feature and Structure of the injection ceramic part lock:

1)Material: advance ceramics.

2)Using method:. Use sloping screw to adjust mold plate and parting locks, turn 1/4 Parting locks can be open-close to 50,000 times.

3) Easy to assemble and disassemble.

4). Can also be installed into small, medium size, and 2-sectional injecting metal pipes, or can be installed on sliding bases.

5).Mold weight <100kg using 4 pieces of 12Ø, Mold weight < 500kg, using 4 piece of 16Ø, Mold weight <1,000kg using 4 piece of 20Ø, Mold weight >1,000kg, using at least 6 piece.

6).Insert parting Locks into die mold about 3cm, then using H 7 reamer 10 process mold hole within +0. 1mm.

7).Process female mold surface to the shape R. If chamfering C, life cycle will shorten.

8).Do not add oil and grease on parting locks, Or else the friction will reduce. 


Parts of ue oem dimensions(include but not limited belows)

D d1 H L M B
10 8.5 3 18 M5 4
12 11 3.5 20 M6 5
13 11 3.5 20 M6 5
16 14 4 25 M8 6
20 16 5 30 M10 8
The thickness , diameter and shape of the ceramic plates are customized.

Delivery: 
Custom OEM will be shipped within 15 days after determining the parameters  
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations （the price,delivery time,moq etc）about the ceramic plates, please contact us or email:admin@cerampart.com

Machining process
Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector

Mingrui ceramic parts property
· Flexural strength · Chemical resistance · Electrical insulation · Corrosion resistance · Dielectric strength
· Wear resistance · Temperature resistance · Thermal conductivity · High voltage · Hardness...
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...

 
Al 2O 3		 ZrO2/Y2O3 ZrO2/MgO MgO SiC Si3N4 Reaction sintered Si3N4 Hot pressed ALN
Physical properties                
Density (g/cm3) 3,9 5,9 5,75 3,58 3,2 3,27 3,29 3,26
Molecular weight (g/mole) 102 - - 40,4 40,1 140 140 41
Maximum service temperature air (°C) 1700- 1800 1500 1000 2200 1500 1200- 1500 1100- 1600 1000- 1800
Mechanical properties                
Hardness (Mohs) 9 - - 5,5 9 - - 7
Modulus of elasticity (GPa) 300-400 200 200 250-300 420 170-220 280-310 318
Poisson's ratio 0,25 - - 0,18 0,14 0,25-0,26 0,27 0,25
Fracture toughness (MPa.m1/2) 2-3 7-13 6-10 - 2,5-3,5 3,5-5 6,1 4,5
Electrical properties                
Dielectric constant 9-10 - - 9-10 - 10 10 9,2
Electrical resistivity at 20°C (Ohm.cm) >10 14 10 13-10 14 >10 10 - 10 2-10 6 >10 7 10 12- 10 15 >10 14
Dielectric strength (kV/mm) 10-20 9 2-10 - - - - 15
Thermal properties                
Specific heat (J/K/kg) 900 400-500 420 870-880 750 690 680-800 800
Thermal conductivity (W/m/K) at 20°C 26-35 2,2-3,2 1,5-2,5 40-50 63-155 9-30 15-43 180
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C 8-9 10-11 5-16 10-13 4-5 3 3,3 4,4-5,3
Melting point (°C) 2050 2590 - 2800 2500 1900 1900 2200

 

Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by EMAIL.

Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
 		  
Technical reference of manufacture
Dimensional accuracy Up to 0.001mm
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Precision process CNC maching,grinding,lapping
Surface finish Glazed,polishing or metallized
 


FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about ceramics parts,please contact our engineers in time  >>>       
 
 

 

Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City