E-mail：admin@cerampart.com

Silicon Carbide Ceramics

Silicon carbide ceramic pins High temperature resistant SiC ceramic welding pins

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes：Custom according to the drawings
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

High-strength, high-hardness, high-wear resistance, and high-temperature resistant silicon carbide ceramic pins


Silicon carbide ceramic pins are a type of ceramic product with excellent performance and high application value, and are widely used in multiple industries. The following is a detailed introduction to silicon carbide ceramic pins:
 

1. Basic characteristics of silicon carbide ceramic pins
 

Material: Silicon carbide (SiC), which is a ceramic material with high strength, high hardness, high wear resistance, high temperature resistance and good thermal shock resistance.
Performance: Silicon carbide ceramic pins usually have excellent corrosion resistance, oxidation resistance and thermal conductivity, and can work stably in harsh environments such as high temperature, high pressure and corrosion.
 

2. Application fields of silicon carbide ceramic pins

 
Electronic industry: Silicon carbide ceramic pins can be used in electronic packaging, thermal management and other fields. Due to their high thermal conductivity and low thermal expansion coefficient, they can effectively improve the heat dissipation performance and stability of electronic equipment.
 
Mechanical industry: In precision machinery and automation equipment, silicon carbide ceramic pins can be used as positioning pins, fixing pins, etc., using their high hardness and wear resistance to improve the precision and life of mechanical parts.
 
Aerospace: Because silicon carbide ceramics have the characteristics of low density, high strength and high temperature resistance, they are also suitable for thermal protection systems, engine components, etc. in the aerospace field.
 
Other industries: such as chemical, metallurgical, petroleum and other industries, silicon carbide ceramic pins can also be used to make corrosion-resistant and high-temperature resistant pipes, valves and other components.
 

3. Manufacturing process of silicon carbide ceramic pins

 
The manufacturing process of silicon carbide ceramic pins mainly includes steps such as raw material preparation, molding, sintering and post-processing. Among them, sintering is the key link in the manufacture of silicon carbide ceramic pins, which can be carried out by pressureless sintering, hot pressing sintering and other methods. These processes can ensure that silicon carbide ceramic pins have the required density, hardness and strength.
 
Delivery: 
Custom OEM will be shipped within 15 days after determining the parameters  
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations （the price,delivery time,moq etc）about the ceramic plates, please contact us or email:admin@cerampart.com

Machining process

Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector



Mingrui ceramic parts property

· Flexural strength · Chemical resistance · Electrical insulation · Corrosion resistance · Dielectric strength
· Wear resistance · Temperature resistance · Thermal conductivity · High voltage · Hardness...

Ceramic materials(include but not limited belows)

· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...
 

 
Al 2O 3		 ZrO2/Y2O3 ZrO2/MgO MgO SiC Si3N4 Reaction sintered Si3N4 Hot pressed ALN
Physical properties                
Density (g/cm3) 3,9 5,9 5,75 3,58 3,2 3,27 3,29 3,26
Molecular weight (g/mole) 102 - - 40,4 40,1 140 140 41
Maximum service temperature air (°C) 1700- 1800 1500 1000 2200 1500 1200- 1500 1100- 1600 1000- 1800
Mechanical properties                
Hardness (Mohs) 9 - - 5,5 9 - - 7
Modulus of elasticity (GPa) 300-400 200 200 250-300 420 170-220 280-310 318
Poisson's ratio 0,25 - - 0,18 0,14 0,25-0,26 0,27 0,25
Fracture toughness (MPa.m1/2) 2-3 7-13 6-10 - 2,5-3,5 3,5-5 6,1 4,5
Electrical properties                
Dielectric constant 9-10 - - 9-10 - 10 10 9,2
Electrical resistivity at 20°C (Ohm.cm) >10 14 10 13-10 14 >10 10 - 10 2-10 6 >10 7 10 12- 10 15 >10 14
Dielectric strength (kV/mm) 10-20 9 2-10 - - - - 15
Thermal properties                
Specific heat (J/K/kg) 900 400-500 420 870-880 750 690 680-800 800
Thermal conductivity (W/m/K) at 20°C 26-35 2,2-3,2 1,5-2,5 40-50 63-155 9-30 15-43 180
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C 8-9 10-11 5-16 10-13 4-5 3 3,3 4,4-5,3
Melting point (°C) 2050 2590 - 2800 2500 1900 1900 2200

 

Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by EMAIL.

Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
 		  
Technical reference of manufacture
Dimensional accuracy Up to 0.001mm
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Precision process CNC maching,grinding,lapping
Surface finish Glazed,polishing or metallized
 


FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about ceramics parts,please contact our engineers in time  >>>       
 
 
Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City