E-mail：admin@cerampart.com

Silicon Carbide Ceramics

Silicon carbide ceramic tubes Wear-resistant silicon carbide pipes High temperature resistant SiC ceramic tubes

  • Materials：Silicon carbide SiC
  • Sizes：Mini-OD: 0.02mm;Max-length: 2500mm
  • Delivery times：2-25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：High hardness, high strength, low density, high temperature resistance, wear resistance and corrosion resistance

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

High temperature and wear resistant silicon carbide ceramic tubes High hardness silicon carbide ceramic pipes
 

Silicon carbide ceramic tubes and ceramic parts produced by Mingrui Ceramics


Silicon carbide ceramic tubes and ceramic parts produced by Mingrui Ceramics

Silicon carbide ceramic tubes are advanced ceramic products made of high purity silicon carbide (SiC) materials. Silicon carbide is an inorganic non-metallic material with extremely high hardness, strength, wear resistance, corrosion resistance and excellent high-temperature stability. These characteristics make silicon carbide ceramic tubes show unique advantages in many industrial fields.
 
Silicon carbide ceramic tubes can maintain their mechanical properties and chemical stability at extremely high temperatures, and can usually withstand a temperature range far exceeding that of traditional metal materials.
 
For a variety of corrosive media such as acids, alkalis, and salts, silicon carbide ceramic tubes show excellent corrosion resistance and are suitable for various harsh chemical environments.
 
The hardness of silicon carbide is second only to diamond, so silicon carbide ceramic tubes have extremely high wear resistance and can maintain a long service life in high-speed friction and wear environments.
 
Compared with many metals and alloys, silicon carbide ceramic tubes have a lower coefficient of thermal expansion, which helps to maintain dimensional stability under high temperature conditions.
 
Silicon carbide ceramic tubes have excellent thermal conductivity and can effectively transfer heat, making them suitable for occasions requiring efficient thermal management.
 
Silicon carbide ceramic tubes are widely used in energy and environmental protection, chemical machinery, semiconductors, national defense and military high-temperature bearings, bulletproof plates, nozzles, high-temperature corrosion-resistant components, and electronic equipment components in the high-temperature and high-frequency range due to their excellent performance.

Manufacturing precision:
ceramic nozzle precision machining dimension can be up to plus or minus 0.001mm, the minimum pore diameter can be machined 0.07mm, the minimum tolerance of inner hole can be machined 0.005mm. High precision, high surface smoothness.

Delivery: 
Custom OEM will be shipped within 15 days after determining the parameters  
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations （the price,delivery time,moq etc）about the ceramic plates, please contact us or email:admin@cerampart.com

Machining process
Raw materials-Molding process - Sintering - Machining & Grinding - Quality Inspector

Mingrui ceramic parts property
· Flexural strength · Chemical resistance · Electrical insulation · Corrosion resistance · Dielectric strength
· Wear resistance · Temperature resistance · Thermal conductivity · High voltage · Hardness...
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride  · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)   · ZDY: Yttria fully stabilized Zirconia (ZrO2)...

 
Al 2O 3		 ZrO2/Y2O3 ZrO2/MgO MgO SiC Si3N4 Reaction sintered Si3N4 Hot pressed ALN
Physical properties                
Density (g/cm3) 3,9 5,9 5,75 3,58 3,2 3,27 3,29 3,26
Molecular weight (g/mole) 102 - - 40,4 40,1 140 140 41
Maximum service temperature air (°C) 1700- 1800 1500 1000 2200 1500 1200- 1500 1100- 1600 1000- 1800
Mechanical properties                
Hardness (Mohs) 9 - - 5,5 9 - - 7
Modulus of elasticity (GPa) 300-400 200 200 250-300 420 170-220 280-310 318
Poisson's ratio 0,25 - - 0,18 0,14 0,25-0,26 0,27 0,25
Fracture toughness (MPa.m1/2) 2-3 7-13 6-10 - 2,5-3,5 3,5-5 6,1 4,5
Electrical properties                
Dielectric constant 9-10 - - 9-10 - 10 10 9,2
Electrical resistivity at 20°C (Ohm.cm) >10 14 10 13-10 14 >10 10 - 10 2-10 6 >10 7 10 12- 10 15 >10 14
Dielectric strength (kV/mm) 10-20 9 2-10 - - - - 15
Thermal properties                
Specific heat (J/K/kg) 900 400-500 420 870-880 750 690 680-800 800
Thermal conductivity (W/m/K) at 20°C 26-35 2,2-3,2 1,5-2,5 40-50 63-155 9-30 15-43 180
Coefficient of thermal expansion ( 10-6) from 20 to 1000°C 8-9 10-11 5-16 10-13 4-5 3 3,3 4,4-5,3
Melting point (°C) 2050 2590 - 2800 2500 1900 1900 2200

 

Customization & Machining Service:
As a ceramic parts manufacturer,us offer a wide of the ceramic specification,and customized&machinables. Get a Quote On Your Customized Now!!  or up a files by EMAIL.

Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
 		  
Technical reference of manufacture
Dimensional accuracy Up to 0.001mm
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Precision process CNC maching,grinding,lapping
Surface finish Glazed,polishing or metallized
 


FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
 
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.

For more information about ceramics parts,please contact our engineers in time  >>>       
 
 
Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City