E-mail：admin@cerampart.com
Ceramic valves and valve components custom cnc machined ceramic valve parts
- Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC
- Sizes：Custom according to the drawings
- Delivery times：2 -25 days(depends on the quantity)
- Precision：Ra 0.1um tolerance: 0.001mm... etc
- Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation
Ceramic Valves And Valve Components Custom Cnc Machined Ceramic Valve Parts
As a pro ceramic valve components factory, us produce and sales mutli sizes and types of ceramic valve components for pump. we can also support to custom ceramic valves by our customer requirments.
Our ceramic vale made by high purity ceramic raw which have High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1750°), good thermal diffusivity, good insulativity, low cost etc.
Ceramic valves and valve components:
Abrasion-Resistant Valves
Needle Valves
Wing-Guided Valves
Gate Valves
Stem-Guided Plate Valves
Ball & Seat Check Valves
Plug Valves
Custom Valve Components
Valve Balls
Valve Erosion Rings & Sleeves
|
Features of ceramic components: 1. Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)... 2. Hardness Strength Up To Mohs 9.0; HRA 80-90, Wear Resistance wear rate 0.68 mm3·m-2·h-1.... 3. High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm... 4. High Polished Surface Up To Rz0.8(Ra0.1) ... 5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture toughness, 6. Pressure Resistance, Max 2300MPa compressive strength... 7. Anti-High Corrosion Resistance, Such As Acid Alkali Resistance... 8. Long Service Life... 9. Other excellent property Other ceramic valve components: ceramic sealing,ceramic seat, ceramic ball, ceramic washer, ceramic ring, ceramic bushing sleeve, ceramic rube, ceramic flanged, ceramic tube etc |
 |
For more sizes, types, application, price,delivery time etc details,please contact us soon , Mr admin admin@cerampart.com
Our ceramic engineer service , quicky feeback!!!
Application:
Rail for semiconductor transfer
Industrial use cutter
General industrial machinery parts
Abrasion resistant parts
Products:plunger, ceramic shaft, fiber optic bushing, stub, grinding, ceramic knife, ceramic slide guide, machined plunger, mobile phone shell, watch case, haircut razor blade etc.
The structural characteristics of the valve can be classified according to the direction of movement of the closing member relative to the seat:
(1) closing door shape: the closing member moves along the center of the valve seat;Such as cut-off valve
(2) cock and ball: the closing member is a plunger or ball, rotating around its center line;Such as plug valve, ball valve
(3) gate shape: the closing member moves along the center of the vertical valve seat;Such as gate valves, gates, etc
(4) swing shape: the closing part rotates around the shaft outside the valve seat;Such as swing check valve
(5) butterfly: the disc of the closing part rotates around the axis in the seat;Such as butterfly valve, butterfly check valve, etc
(6) slide valve: the closing member slides in the direction perpendicular to the channel.Such as sliding
Ceramic materials(include but not limited belows)
· 95%--99.99% Alumina (Al2O3) · Silicon Carbide · Silicon Nitride · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2) · ZDY: Yttria fully stabilized Zirconia (ZrO2)...
· 95%--99.99% Alumina (Al2O3) · Silicon Carbide · Silicon Nitride · TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2) · ZDY: Yttria fully stabilized Zirconia (ZrO2)...
|
|
Al 2O 3 |
ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN |
| Physical properties | ||||||||
| Density (g/cm3) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
Our Custom Capabilities:
1.High Purity Martoxid Powder
2.OEM Support, More Than 10 Technicians With 5-Year R&D Experience
3.35000 ㎡workshop, annual output could reach hundred million pieces.
4.All crafts are inspected strictly based on drawings,checked each month.
5.Best Service And Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
| Technical reference of manufacture | |
| Dimensional accuracy | Up to 0.001mm |
| Concentricity | Up to 0.003mm |
| Parallelism | Up to 0.002mm |
| The inner hole tolerance | The minimum 0.005mm |
| Straight flute | The narrowest 0.1x100mm |
| The thickness of the size | Minimum to 0.02mm |
| The screw thread | Minimum internal thread M2 |
| Cylindricity | Up to 0.004mm |
| The linear tolerance | Up to 0.001mm |
| The smallest aperture | The minimum 0.07mm |
| Precision process | CNC maching,grinding,lapping |
| Surface finish | Glazed,polishing or metallized |
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Feedback
1. For any query or doubt, please contact us firstly, we will update with you soon;
2. For any other satisfaction, please also feedback to us, which could improve our service better and better.
| For more information about Ceramic valves and valve components,please contact our engineers in time >>> |
  |
Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City
HOME
WHATSAPP
CONTACT
TEL