E-mail：admin@cerampart.com

Food medical ceramics

Medical pump with advance ceramics

  • Materials：Alumina (Al2O3)/ Zirconia(ZrO2) /Si3N4 /SiC ...etc
  • Sizes：Custom according to the drawings
  • Delivery times：2 -25 days(depends on the quantity)
  • Precision：Ra 0.1um tolerance: 0.001mm... etc
  • Features：Heat resistance / Wear resistance / High purity / Refractory / High Corrosion / Good Insulation...

Hotline

+86181-2297-4730

E-mail

admin@cerampart.com

Medical pump with advance ceramics


Medical pump is composed of high-density imported zirconia ceramics. The plunger rod and hydraulic cylinder of ceramics are processed by precision instruments. The ceramic surface is highly polished.No leakage of liquid occurs, thus achieving sealing.Because the surface is high polishing, low friction coefficient, high hardness, in mutual high-speed operation will not produce a lot of heat, and the thermal stability of ceramics is high, will not occur deformation, so can really achieve tens of millions of times running without wear.

The filling precision of Medical pump can be less than 0.25%, and its unique and precise design structure can continuously and stably maintain the high-precision output, free from environmental factors.Medical pump precision machining dimension can reach + / - 0.001mm, the narrowest machining groove width 0.1 x 100mm, linear tolerance up to 0.001mm, cylindricity up to 0.004mm.

The design of Medical pump used tilt Angle to realize the reciprocating movement of plunger rod.It has many advantages such as good stability, easy disassembly and cleaning.And when adjusting the filling volume as long as the Angle value can be achieved.Pump modules are special ceramic stainless steel structure, with corrosion resistance, long life, maintenance free features.

Materials:
Property Alumina  Property Zirconia
Bulk density(g/cm3) 3.85-3.93 The density (g/cm3) 6.05
Hardness(HRA≥) 86 Bibulous rate(%) 0
Bending strength（Mpa≥） 300 Thermal expansion coefficient(10-6 /k) 10.5
Maximum service temperature（℃） 1500 Young's modulus of elasticity(Gpa) 210
Linear expansion coefficient（×10-6/℃） 7.15-7.67 Poisson's ratio(/) 0.3
Dielectric constant（εr(20℃,1MHz)） 9.21 Hardness (MPa) 1200
Dielectric loss（tanδ×10-4,1MHz） 2.5 Bending strength (MPa) 950
Volume resistivity（Ω·cm(100℃)） 9.2*1016 The bending strength (MPa) 210
The compressive strength（Mpa≥） 2500 Compressive strength (MPa) 2000
Flexural strength（Mpa≥） 200 Fracture toughness(Mpa.m1/2) 10
Modulus of elasticity（Gpa） 300 Thermal conductivity (W/m.k) 2
Poisson's ratio 0.2 Specific resistivity(Ω.mm2/m) ＞1015
Thermal conductivity Coefficient(W/m·K(20℃)) 20 Maximum service temperature(℃) 1350
Dc breakdown strength 43.7 Acid and alkali corrosion resistance(/) strength
Tensile seal strength(Mpa) 104.4    


Dimensional accuracy Up to 0.001mm
Smoothness Highest possible mirror
Concentricity Up to 0.003mm
Parallelism Up to 0.002mm
The inner hole tolerance The minimum  0.005mm
Straight flute The narrowest 0.1x100mm
The thickness of the size Minimum to 0.02mm
The screw thread Minimum internal thread M2
Cylindricity Up to 0.004mm
The linear tolerance Up to 0.001mm
The smallest aperture The minimum 0.07mm
Visual quality:
1. No cracks,  no dark dots, no contamination and sharp edges;
2. Evenly distributed glaze with very smooth surface

Properties :

1. High Hardness wear resistance
2. High precision
3. Good mechanical strength
4. High temperature and chemical resistance
5. Electric insulation
6. Low thermal expansion
7. Smooth surface finish
8. Thermal Shock Resistance 

Material :  
1. Alumina ceramic
2. Zirconia ceramic
3. Silicone carbide
4. Silicone nitride
Lead-time: 20-30 days for mass production, 7-15 days for samples.
 

Top

Dongguan Mingrui Ceramic Technology Co., Ltd.
TEL：+8618122974730
MB：+86 181 2297 4730 Tel：+86 746 3386888
Skype：+86 181 2297 4730
Email：admin@cerampart.com
ADD：No. 21, Chuangxing Road, Shangsha Second Industrial Zone, Chang'an Town, Dongguan City